gyayo2012 Posted March 26, 2010 hey guy just picked up a cylinder works bigbore (12:1) !!👍 mods, -3x3 yoshi rs2 full system 39mm jetted to eddies specs! runs awsome!!! Im in the market for E cams but im ready to send this big bore in!! I was wondering what the jetting specs are for running the stock sm cams, and wen I get the E cams what the jetting should be if there is a diffrence!?? let me know what you know!🤣 . thanks to everyone. Share this post Link to post Share on other sites
Wayward Son Posted March 26, 2010 where did the carb come from. Share this post Link to post Share on other sites
gyayo2012 Posted March 26, 2010 one of my buddys, older style cr flat removable bellhousing.. Share this post Link to post Share on other sites
Wayward Son Posted March 26, 2010 is it oem fcr? meaning does it have a air cut valve? Share this post Link to post Share on other sites
gyayo2012 Posted March 26, 2010 Im sorry I have no idea... how would I be able to tell?.. Its a slant body w/tps..... if that helps Share this post Link to post Share on other sites
gyayo2012 Posted March 26, 2010 yes found a picture of the (acv) i do not have one on my carb http://www.thumperfaq.com/acv.htm Share this post Link to post Share on other sites
Wayward Son Posted March 27, 2010 160 main jet 200 main air jet EMN needle 45 pilot jet 100 pilot air jet 2 turns fuel screw Share this post Link to post Share on other sites
gyayo2012 Posted March 27, 2010 The same goes with the. E cams? Clip 3 on the needle. Thanks amillion Share this post Link to post Share on other sites
