moto_psycho Posted March 27, 2010 ok, its 3x3 dep exhaust 45 idle, 162 main, stock needle in the middle clip there is a really bad bog around 1/4 throttle, i took the airbox cover off and this made it worse, raise the needle right? Share this post Link to post Share on other sites
Smias My Ride Posted March 27, 2010 Search for the Eddie mod 👍 Share this post Link to post Share on other sites
Wayward Son Posted March 27, 2010 what version of the fcr? what is the complete current jetting? Share this post Link to post Share on other sites
moto_psycho Posted March 27, 2010 FCR MX from a DRZ-E 45 idle stock needle 3rd clip 162 main 3x3 mod. basically at sea level. stock header, DEP end can i have the red jd needle to hand aswell everything else is stock how the drz-e comes Share this post Link to post Share on other sites
tarka Posted March 27, 2010 Stock needle should be clip 5 Share this post Link to post Share on other sites
moto_psycho Posted March 28, 2010 what about the JD needle? Share this post Link to post Share on other sites
moto_psycho Posted March 28, 2010 am i supposed to remove the idle air jet also? Share this post Link to post Share on other sites
