Jump to content

Handle bars for my trx 450r


Recommended Posts

Hey guys

Im looking to replace my stock bars for some new aftermarket ones.

What works well with sport quads.

Any recomended bars and sets ups would be appreciated

Please incude which bend would be best to go with.

Thanks guys

Link to comment
Share on other sites

Link to comment
Share on other sites

I have the TagMetals X5 on other quads and dirt bikes, and it gives a more "normal" bar height when used with stock bar mounts. Thing is, you have to deal with the crossbar and a pad, which often can get in the way.

My local riding has very steep ascents and descents (often with overhangs, that you have to pop over!), so I very much prefer a low bar position. If one prefers a higher position, it is a simple matter to raise the mount on one that is to low, vs trying to lower something that you find to high.

I haven't tried any of the flexable bars, but I fear that I would not like a mushy feel of any kind.

Link to comment
Share on other sites

CR HI is very close to stock, when used with the stock mounts.

If your mounts are of a different height, I would figure out what the difference is, then take a CR HI bar at your local shop and compare it to other bars and pick something that makes up for the difference.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...