Jump to content

will this affect anything?


Recommended Posts

hi i pulled off the valve cover today and noticed my timing marks were slightly off (yes the crank was at tdc) 2001 yz 250f

so the exhaust cam dot that is meant to be lined up alongside the head was about 0.3 4 or 5 cm up from the head.

the intake was about 0.3 4 or 5 under the line of the head.

so obviously the the idiot who set the timing before was in a rush.

would this affect my clearances as some valves were out i was just wondering if this could cause a incorrect clearance reading

Link to comment
Share on other sites

won't make the clearance readings wrong unless your using the flywheel marks to set the cam positions....I usually eye ball the cam heals when checking clearances.....

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...