redrider7202 Posted March 29, 2010 So, I have an FMF turbinecore 2 on my bike. Thing vibrates to the point where the ground shakes and caused one of the bolts holding it on to fall out. So, i'm missing the bolt (no big deal) and the little metal insert thing that goes through the rubber grommet. (i hope someone can understand this) anyone know where to find one of those? or am i gonna have to get creative with some aluminum? Share this post Link to post Share on other sites
2006yz125 Posted March 29, 2010 i think that i know what your talking about... but a picture would be really helpful... so if you could get a picture posted up of it i would definetly give you some advice... Share this post Link to post Share on other sites
mxn4life Posted March 29, 2010 i think that i know what your talking about... but a picture would be really helpful... so if you could get a picture posted up of it i would definetly give you some advice... Go to the harware store and get a aluminum sleeve or make one out of a hollow aluminum tube, cut it to the size you need and walla. They should have the correct flange bolt and nut aswell. I use red locktite an all my bolts, never loose any of them. Share this post Link to post Share on other sites
redrider7202 Posted March 29, 2010 alright, so hardware store it is. I'd post a picture but my bike is home and i live at school during the week. Share this post Link to post Share on other sites
