MX303 Posted March 30, 2010 Im trying to sort out some valving issues on a 07 ktm 150, can anyone post up the OEM suspension valving so i have a starting point to go by. Thanks Share this post Link to post Share on other sites
mog Posted March 30, 2010 base is 24.15(3) 14.1 24.15(4) down to in even numbers 12.15 9.5 clamp mid is 20.1(5) 18.1 11 clamp 0.45mm lift 1.2 bar 385cc 4.2 spring 18 comp setting std 21 rebound std this mid is not too bad with less lift. the base is just horrible, in a horrible world, surrounded by horrible things. Share this post Link to post Share on other sites
MX303 Posted April 2, 2010 This bike has a stock 450 spring on the rear and 2 sizes up spring rate in the front. The rider is 5'8' 160lb intermediate mx guy. Any suggestions on fork/shock valving to improve this ride 👍 Share this post Link to post Share on other sites
mog Posted April 2, 2010 its hard to say really, but if you replaced all the 0.15mm shims for 0.1mm it will be much better, this fork requires a lot of work to get good. Share this post Link to post Share on other sites