jomodrzsm Posted April 1, 2010 (edited) Eddie, I just installed a flat Cr (not mx) kit on my Drz Sm I have very serious engine bog when i hit the throttle off idle or at low RPMs at higher Rs the bike pulls very hard. also the fuel screw seems to have no effect on idle or bog when I turn it in or out I can actually turn it all the way in and it still idles fine the bike as a full exhaust rs2 and 3x3 also do i need to do anything since the tps is now unplugged jetting is as follows 160 main 45 pilot 60 idle 200 air ( on the intake bell) pas 5/8 turns out red needle clip 3 What am i doing wrong here? Edited April 1, 2010 by jomodrzsm more info Share this post Link to post Share on other sites
spokis Posted April 3, 2010 problems with hitting the throttle are related to the AP. search for the eddie mod, here and on the drz forum.. Share this post Link to post Share on other sites
jomodrzsm Posted April 5, 2010 Yeah I read about that. I did do the Eddie mod and it helped significantly. the bike still hiccups a little but I am hoping a larger ap cover and puting the air box back on will help Share this post Link to post Share on other sites
Smias My Ride Posted April 5, 2010 Just put the air box back . Share this post Link to post Share on other sites
