Jump to content

86 cr125?


Recommended Posts

hey looking for some help i am new to the forum and also just finished rebuilding a 86 cr 125 and had a few questions..... after i heat cycled through the breakin i noticed that the bike just doesnt have much of a top end or a power band its there at times.. but mostly not. this year bike had the exhaust valve and heard that its better to block it off.....is this true?

secondly would a new set of reeds and a good carb clean take care of my problem?

thanks

jon

Link to comment
Share on other sites

if anyone could point me in the right direction it would be greatly appreciated to day i disassembled the carb and gave it a good cleaning i ran the bike and adjusted the idle and the bike will load up as if the plug is about to foul and then it will pull out i have checked the plug and it seems ok it is a br8es could this problem be caused by the atac valve and how can i fix it thanks

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...