stock fuel screw?

[kustomizm]

i lost my fuel screw and i was gonna order a stock one i think it comes with everyting i need the oring washer and spring and screw is that correct? i had an after market one it had a larger o ring on the back side i cant remember if the stock one had it i havent messed with it in a while. the bike is a 07 450 xcw 39mm fcr

[MrHix]

Yes,

There should be the o-ring, a washer, a spring, and the screw. All you need!

Cheers,

MrHix

[Mike in Fresno]

I would spend my money an a good after market brass screw, not stock.

[kellymac530]

for sure get the after market with the adjustment knob on it. i think it was moose brand that came with the entire kit, washer,spring and o-ring...here is a link

http://shop.thumpertalk.com/catalogs/Parts_Unlimited_Offroad_2009/default.asp?p=817

i have this one because mine backed out as well and i lost the spring and washer

[Dave2]

I picked up the KTM Hardparts screw. Solid stainless and superb finish. Plus I can do it one-handed! $32 at my local stealer.

[LewK]

I use the Merge Racing fuel screw. It's brass, easy to adjust and eliminated my decel pop.

http://www.mergeracing.com/products/FuelMixtureScrew.php

[kellymac530]

there you go, lots of good choices.

i will add my moose is a little harder to adjust than i would prefer. the adjuster knob is round and a little harder to grip than something like the merge racing one with a paddle adjustment knob....i will try that one if i ever loose or break this one.

[ktmfred300]

Sunline makes one as well with spring and o-ring for $20.00.

[Mike in Fresno]

just done buy an alum one, they have poor tolerances and the threads get sticky.

[ktmfred300]

The KTM hard parts is nice but doen't have the spring and o-ring