Jump to content

fitting mrd/ssw


Recommended Posts

HI all im in the process of fitting my mrd ssw i took the old exhaust (stock)off and there was no gasket in the pipe at all connecting header to engine am i right to think this is not normal.

has any one got any pics of these gaskets

also will i need a gasket to connect the header pipe to the exhaust on my mrd/ssw

thanks for your help fellow DRZ ers 👍

Link to comment
Share on other sites

Typically the gasket is stuck in the port. It is silver in color and hard to distinguish from the aluminum surrounding it.

It does not typically need to be replaced. If it were gone...you would definitely notice as the pipe would sink and extra qtr inch or more into the head causing obvious fitment issues.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...