Crf front end with rear submount stabilizer..pics

[hontri]

I wanted a rear sub mount and the options were limited to non existent soooo! This is a homemade mount which keeps the dipstick in place and allows easy access to it.All you need to add oil is an Allen wrench(which you can carry any where.) Just remove 2 Allen bolts from block and swing block to the left and you have easy access to the dipstick.Takes about a minute!

Feel free to copy.

[scalejockey]

Sweeet set-up.Must be a custom stem with the 47mm usd dual chamber forks? eh?

I have a complete front end off a RM (49 mm usd) just begging to be put on my pig.

[hontri]

Sweeet set-up.Must be a custom stem with the 47mm usd dual chamber forks? eh?

I have a complete front end off a RM (49 mm usd) just begging to be put on my pig.

Thanks...Crf stem.Evolution bearing on top.Simple bolt in installation.(No machining or parts swapping)Dual chamber forks.

[Kawidad]

Very nice work. 🤣👍

[Rojo]

That is very very nice work. 👍

[drtlvr]

nice set up:thumbsup: did you ever think of making your own dip stick,maybe with a flexible cable and a low profile knurled aluminum knob so you wouldn't have to remove anything.