luto14 Posted April 11, 2010 installed new clutch cover just wanted to know the Ft pounds of tork on bolts and is there a easy way to fill gear oil OMG it takes forever Share this post Link to post Share on other sites
TDW Posted April 11, 2010 manual says 7 ft lbs for clutch cover bolts. The best and fastest way is by removing the crankshaft hole cap(on RS of the engine next to the cluitch cover) and pour in the gear oil-might have to tilt the bike to the side alittle to get it full. Share this post Link to post Share on other sites
scott_01_xr400 Posted April 11, 2010 The best and fastest way is by removing the crankshaft hole cap(on RS of the engine next to the cluitch cover) and pour in the gear oil-might have to tilt the bike to the side alittle to get it full. I second that. But do not put that plug back in too tight. I cracked mine last night. got a new one ordered. Share this post Link to post Share on other sites
luto14 Posted April 11, 2010 Oh sweet deal Thanks a lot Share this post Link to post Share on other sites
dmac1 My Ride Posted April 12, 2010 I second that. But do not put that plug back in too tight. I cracked mine last night. got a new one ordered. +1 on not too tight! That plug hardly seems snugged up and its at spec. I don't remember spec though. Share this post Link to post Share on other sites
