Ricky W Posted April 12, 2010 i have a 07sm with 3x3 and end cap off of exhaust the rest is all stock. im jetting it with 150 main and 25 pilot. any suggestions on moving the needle clip or should i leave it? thanks.. Share this post Link to post Share on other sites
osiris07lv My Ride Posted April 12, 2010 i have a 07sm with 3x3 and end cap off of exhaust the rest is all stock. im jetting it with 150 main and 25 pilot. any suggestions on moving the needle clip or should i leave it? thanks.. stock needle?? stock needle only has one spot for a clip 36mm bsr carb Share this post Link to post Share on other sites
Ricky W Posted April 12, 2010 okay well i did not know that i havent took it all apart yet. so i guess i will be leaving it lol. thanks. Share this post Link to post Share on other sites
osiris07lv My Ride Posted April 12, 2010 okay well i did not know that i havent took it all apart yet. so i guess i will be leaving it lol. thanks. you need a jet kit >> http://www.jdjetting.com/xcart/product.php?productid=53&cat=9&page=1 << this will get you going and i wouldn't cut the air box till you get the jet kit 👍 Share this post Link to post Share on other sites