Jump to content
Sign in to follow this  

Wiring/Blinker Help

Recommended Posts

So i had aftermarket blinkers on my 09 te510 till one snapped off. So i decided i was going to hook up my stock rear ones again. I have an auto tuner and a PC5. After i wired up my blinkers to the back and re-connected all the wires to and from the autotune and pc5 O2 sensor etc... (BTW does the auto tune draw power from the blinker wire because there is a wire going back to the taillight assembly coming from the autotune and im not sure why it is there). When i turn my key on the fuel pump primes and the bike will start and run. BUT i have no power to the screen on the bars the blinkers the headlight and the horn have nothing. I can't for the life of me figure out what is wrong with this thing. Any troubleshooting ideas or past experience in this subject greatly appreciated.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...