Jump to content

Leak jet part #


Recommended Posts

Well I rang up honda (closest dealer to me) and asked if they had any leak jets in stock. Well they preceded to ask me questions and determined I needed to ring husqvarna to get a part number. Are they being idiots or is it me? I am under the impression all leak jets are universal for FCR carbs, is this not so?

Anyway what is the part number for a #50 Leak jet for an 07 TE 450 with an FCR-MX41? And do any other bikes have the same leak jet #?

Link to comment
Share on other sites

I have a 08 TXC250 ( FCR-MX 37 Keihin )and I purchased a JD CARB kit for it but was sold a kit (JDHQ03) for a 450\510 (06-08) model instead :banana: ...

I contacted James Dean and he said the parts were all the same in both kits with the exception of a different pilot jet size included with the kits ...

His kits come with a #65 leak jet ... not sure of the part number ....

Hard to say on the idiot question ... never met U but U do own a Husky ...🙂 and I have met more that 1 parts guy who did not know his job very well :0 ) ... You might should have acted like U owned a honda to smooth over the process🤣

This might help on the part number ...

http://www.keihin-us.com/am/_media/pdf/jetlist.pdf

Edited by ray_ray
Link to comment
Share on other sites

http://www.sudco.com/fcrmx.html

call/email sudco (USA) and ask for FCR41 parts and leak jets. they are the kings of carbs. They have an unbelievable stock for all Mikuni and Keihin carbs.

Tokyo mods (Ron W) also is a Keihin specialist and sell all Keihin jets see jet chart, you need to know what size you want and order that size.

http://www.tokyomods.com/carburetion/carburetion.html

Link to comment
Share on other sites

Ok got it sorted out. It was a tool at honda yesterday, got a part number and it's all sorted. Thanks for your help 😏 :smirk:

So were they the same? I actually need a pilot jet from one of these CARBS possibily ...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...