Jump to content

ktm 09 200xc-w fork shim stack


Recommended Posts

Here are my shim stack numbers (stock). I'm in the process of changing the compression valving a little. I was told to take a few shims out so i'll see how that goes.

Also I'm gonna change the mid-valve a little bit.

After the compression piston-

(5) 24 x 6mm id

(1) 22 x 6

(1) 18 x 6

(1) 16 x 6

(1) 14 x 6

(1) 12 x 6

(1) 8.5 x 6

(1) 16 x 6

Here are therebound and mid-valve numbers-

(1) 14 x 6

(1) 10 x 6

(1) 12 x 6

(1) 14 x 6

(1) 17 x 6

(3) Delta shims

Rebound piston

(2) 18 x 6

(3) 20 x 6

(1) 18 x 6

(1) 16 x 6

I can't really tell the width of each shim because I don't have the best micrometer.

Link to comment
Share on other sites

i have not done much on this fork, but you want a float of about 0.35 and i would guess std is about 0.5 to 0.7mm, then you need to tune the base for the correct feel.

Link to comment
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...