Jump to content

Fuel Issue


Recommended Posts

Hi Guys

I installed my new Clarke tank today then went to go for a ride but now the bike keeps starving for fuel! ๐Ÿ˜ it will only run with the fuel tap on PRI and if I swap it to ON or RES the bike runs out of fuel. I put the original tank back on and it's still doing it! ๐Ÿ˜ it's the same fuel tap for both tanks and didn't have an issue before I changed tanks.

it's a 2010 DRZ400SM with about 1200km on it (800Miles ?)

any ideas?

Link to comment
Share on other sites

Cheers guys! I think that's done the trick ๐Ÿ˜ ... I just checked the bike and sure enough the vacuum line was unplugged ๐Ÿ˜, I actually noticed yesterday when I put the original tank back on that the petcock had a fitting for another hose on it, but when I pulled the tank off to put the Clarke on I didn't notice the vacuum line and it just pulled off when I removed the tank.

Thanks for the help, now with me being in Australia if you guys could just work out some kind of roster so there is always someone online to answer my dumb questions and I don't have to wait until the next day that would be appreciated! :cheers:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

ร—
ร—
  • Create New...