Jump to content

Dell Taco to 01 YZ Forks.

Recommended Posts

I'm in the process of installing the kit and am having a bit of trouble. The instructions that I have found online seem to be for the newer style forks and a lot is different. All of the shims are of different sizes and my kit did not come with the stiffer springs. I was just wondering if there was a guide for the 01 style forks because I'm completely lost right now and I was just wondering if I complety missed a thread on it or something. Thanks.

Link to comment
Share on other sites


See if this helps you out. https://thumpertalk.com/forum/showthread.php?t=313194


Do you have the forks apart yet?

You will only have one MV spring, #175 Make sure that the spring is

placed on the stem correctly. The lower rung of the spring must sit

flat on the stem over the shoulder. You may have to pry it over the shoulder.

shoot me a pm or an email if you have anymore questions or you can post on here for others

to chime in.


Edited by jwaseman
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

  • Create New...