Jump to content

Need direct fit bars no clamps


Recommended Posts

My stock bars need to go and I am looking for the most rise without adding clamps OR modifying the cables or other parts. Can you steer me in the right direction?Also, When purchasing bars, what diameter am I looking for?

Thank you...

D

Link to comment
Share on other sites

I have the S and here is what I did.

Bar risers, converting standard bar to oversized $80

http://www.rockymountainatvmc.com/productDetail.do?navTitle=Handlebars-Control&webCatId=12&navType=type&webTypeId=70&prodFamilyId=27406&listingId=&sizeAttr=6665&colorAttr=

Pro tapers, travis pastrana FMX bend $70

http://www.rockymountainatvmc.com/productDetail.do?navTitle=Handlebars-Control&webCatId=12&navType=type&webTypeId=70&prodFamilyId=8610&listingId=&sizeAttr=2946&colorAttr=

The risers give you a couple inches and the bars have a lot of rise 120MM if I rememeber right.

I'm 6'3" and I can comfortably stand with this setup.

If you have the SM you have a different top clamp and can/need to go another way

Link to comment
Share on other sites

My stock bars need to go and I am looking for the most rise without adding clamps OR modifying the cables or other parts. Can you steer me in the right direction?Also, When purchasing bars, what diameter am I looking for?

Thank you...

D

If an S or E, Pro taper SE 7/8 bars in CR high.

If an SM, then Pro Taper EVO in CR high

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...