Jump to content

Mixture Adjustment


Recommended Posts

My parts arrived from Honda today so I replaced the main needle, pilot and main jets etc, just wondering do I set the mixture screw @ 1~3/4 turns out from fully in ?, bike seems to run great but not sure about this bit also removed the snorkal etc from the airbox, just the tip to modify.

Link to comment
Share on other sites

My parts arrived from Honda today so I replaced the main needle, pilot and main jets etc, just wondering do I set the mixture screw @ 1~3/4 turns out from fully in ?, bike seems to run great but not sure about this bit also removed the snorkal etc from the airbox, just the tip to modify.

what size jets did you install? read this on how to adjust the fuel screw, https://thumpertalk.com/forum/showthread.php?t=327405

a fellow zx12 onwer, i have a 01 zx12r.

Link to comment
Share on other sites

Hi fellow 12 owner ­čśĆ, I installed the following...

16211-MBN-640 CARB ISOLATOR

99101-357-1750 #175 MAIN JET

16012-MBN-641 MAIN NEEDLE

99105-MBN-0680 SLOW JET

Will try your link and see what altering the screw does to the tick over.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

├Ś
├Ś
  • Create New...