suspension crf 450r 2009

[piedroski]

hello,that the difference with stock setting?look for a softer setting only at high speed and I'm not sure going in the right direction,thanks for your help.

BV

32-0.11 (18)

30-0.11

28-0.11

26-0.11

24-0.11

22-0.11

20-0.11

18-0.11

16-0.11

14-0.25 (4)

BV

32x11-19

26x11-1

30x11-1

28x11-1

26x11-1

24x11-1

22x11-1

20x11-1

18x11-1

16x11-1

14x0.25-3

[rks1]

You need chassis mods on that bike before trying to fix the fork. Install a stiffer fork spring set and a lowering link (+2mm) for the rear and that'll help move the weight bias back and level out the chassis.

As far as your stacks, adding a 32 increases your low-speed damping. But then you're adding a crossover, which will make the lo-speed softer. Taking away a 14x.25 does nothing if that's your end shim.

[piedroski]

You need chassis mods on that bike before trying to fix the fork. Install a stiffer fork spring set and a lowering link (+2mm) for the rear and that'll help move the weight bias back and level out the chassis.

As far as your stacks, adding a 32 increases your low-speed damping. But then you're adding a crossover, which will make the lo-speed softer. Taking away a 14x.25 does nothing if that's your end shim.

hello,if I have a link procircuit and springs 0.48,to smooth the high-speed which I need to change? I'm not sure where begins the high-speed,thanks.

[piedroski]

32x11-19

26x11-1

30x11-1

28x11-1 remove

26x11-1

24x11-1 remove

22x11-1

20x11-1

18x11-1

16x11-1

14x0.25-5_____hello,This would make a smoother high-speed?

Edited August 9, 2010 by piedroski

[racerfmx450]

hello,if I have a link procircuit and springs 0.48,to smooth the high-speed which I need to change? I'm not sure where begins the high-speed,thanks.

at high-speed the complete stack is in Action!

you can try this, unless in deep Sand!

Base

32-0.11 (15) = (SOFTER Setting)

30-0.11

28-0.11

26-0.11

24-0.11

22-0.11

20-0.11

18-0.11

16-0.11

14-0.25 (4) (16,25 4x for stiffer Setting/Very Fast Rider)

mid

20,11 3x

18,11

16,11

14,11 2x (0,11 less float, more Damping)

reb

20,11 2x Faster(Only on Hard Tracks) Top Reb Setting for 0,48 Springs

19,11

13,11

20,11 -(remove this Shimm for Softer Springs(Stock)

18,11

16,11

14,11

12,11

10,20 2x

Oil SAE 5W,C10/ R9. 350ML:thumbsup: