KX 100 rod clearance

[platterdr]

Looks like I am going to have to do a top end in the KX,which is no big deal.

But after pulling off the cylinder I was looking at the rod and noticed what seemed to me alot of play at the crank.

It is not up and down play but side to side,I no it has to have some but this seems excessive. I was able to slide a .0017 feeler guage down between rod and crank.

What is acceptable?

[platterdr]

Nobody?

I figure someone has tore apart one of these,I just need to know if I have too much play in the rod.

[hi_im_sean]

you need to get a manual, side to side play is normal if its in spec. sorry i dont know what it is.