04 RM 65 need longer front break line

Wanting to raise the handlebars an inch for easier trail riding. No problem there. But, the the front break line is short. Anyone out there have an easy solution for a longer break line. Note; the similar KX 65 has a different line and routing.

Gary at SikTendencies can make whatever length you need. Great guy.

Just tell him banjo size (prob 10mm), banjo indexing ie: twist (zero or 90 degrees), banjo bends (10 deg, 45, 90, etc..), and length (eye to eye)

714-392-5929 | Gary@SikRacing.com

http://www.sikracing.com/

You sure you need longer, on my 65 I put taller bars on an didnt need anything longer? Are you putting actual risers in or what?

YES, I had an old set of RM 80 bar caps and just flipped them over. Then used longer Gr #8 bolts. Worked well in the past and very easy to put back for track riding.

heres what I did. KLX tall handlbare, I didnt have to change a thing, the only problem is the throttle cable gets a little tight when you turn the bars all the way to the right. They are alot taller and feel alot better! Just something to look into!

hb.jpg

^You can rotate the throttle with the cable exit on the bottom to get a bit more length out of it .

^You can rotate the throttle with the cable exit on the bottom to get a bit more length out of it .

:cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now