Jump to content
Sign in to follow this  

low voltage help plz

Recommended Posts

so after doing this "mod" to run blinkers, tail, brake lights and a battery

http://www.farplaces.com/dual.htm

ive come to a question.

on my bike 02 wr426

the voltage regulator ran to the headlight (yellow and black) the blue wire was not there.

i plan on running the same yellow and black wire back to the bridge rectifier and then a + and - to the battery..

my question is this..the black wire from the VR and the bolt through the VR to the frame share continuity (ground) can the rectifier, and the battery also share this same lead to ground, or will the ac and the dc lines need dedicated grounds?

this is the nte rectifier

bridge.gif

no.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×