Jump to content
Sign in to follow this  

XR250R cam exhaust lobe wear

Recommended Posts

So my XR250R had lost compression. I puller the top end and the ring end gap & piston clearance were fine. I then decided to check cam lobe measurements. Both exhaust lobes were way worn down. They even had a visible wear to them when compared to the intake lobes. Do I need to replace the rockers too with the cam as the exhaust rockers are not as smooth as the intake rockers now.

Share this post


Link to post
Share on other sites

Yes, replace the rockers as well if they show wear. The faces are hardened, once that surface is compromised they get consumed at a much quicker rate.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×