vapor sensor and 320mm rotor

I have a vapor guage and i just recently installed a 320mm rotor. Im just tryin to get ideas on where to mount the speed sensor.

Drill a small hole on the caliper arm and mount sensor as per instructions...

I used the small magnet included in the kit....Just put a dab of silicone on it and place on rotor where required....

well..thats what i did before w/my stock rotor...but the rotor bolts on the 320 dont even come close to where the caliper arm is. I think im just gonna hafta make a bracket and bolt it down using one of the fork guard bolts.

I zip tied my sensor to the fork. It's worked like that for about 2 years now.

Steve

I zip tied my sensor to the fork. It's worked like that for about 2 years now.

Steve

I did the same thing, works without issue on my bike.

I had no problem mounting the magnet where Trail Tech suggested and aligning the speed sensor, mounting it to the caliper lug.

I too zip tied mine to the fork. Three zip ties, it is temporary. I am going to use a spare boot holder I have and make a more permanant bracket to hold the sensor.

boot holder is the white colar that holds the bottom of the boot on and the brake cable to the fork.

I have the SM and just mounted the sensor to the fork protector and has worked perfect for the last 2 years :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now