Jump to content
Sign in to follow this  

CF skid plate & rad cages for 07 yz450

Recommended Posts

Just picked up a 2007 YZ450F last night, it has everything but a skid plate and radiator cages/guards. Does anyone have any good sources for a carbon fiber skid plate, not finding much besides one on Rockymountain and everything else seems to be glide plates only. Also looking for a good set of radiator cages, something more supportive than those cheesy works connection braces that mount behind the rads.

Share this post


Link to post
Share on other sites

WC doesn't make braces for the '06+ model YZ450. Only cages, and they look pretty sturdy to me:

http://worksconnection.com/details.php?id=511&modyear=322&return=322-7-YZ450F

Lightspeed makes a good full coverage skidder, but it's pricey. As much as I like CF in general, I think I'd rather use aluminum in that role.

Share this post


Link to post
Share on other sites
WC doesn't make braces for the '06+ model YZ450. Only cages, and they look pretty sturdy to me:

http://worksconnection.com/details.php?id=511&modyear=322&return=322-7-YZ450F

Lightspeed makes a good full coverage skidder, but it's pricey. As much as I like CF in general, I think I'd rather use aluminum in that role.

I've used CF in the past with good results, they get a little chewed up but they are tough and light but pricey.

Share this post


Link to post
Share on other sites
This is a well designed radiator cage (not like the normal WC radiator braces for most other bikes). I don't have any issues with it and they do what they are designed to do.:thumbsup:

Yeah those cages do like beefy, much better than those cheesy braces that mount on the back only. I'm not sure if I want to go for cages that cover the front too or just use the stock plastic louvers.

Share this post


Link to post
Share on other sites

Dont bother with a noisy metal one go with a hyde racing SP by far the best. I have had just about every SP out there and HYDE so far is the sturdiest so far, its plastic makes it light quiet and holds up great.

Share this post


Link to post
Share on other sites

I'm looking in to getting the Uninbiker brand guards. They look like they offer great side impact protection AND front protection from sticks/rocks etc. The TT store sells them.

Share this post


Link to post
Share on other sites

I highly recommend the Unabiker Rad guards. I got a set for my bike a little under a week ago. They are built strong and offer great side and front protection. Best $$$$ spent so far and put your mind at ease :smirk:

Share this post


Link to post
Share on other sites

Well I ended up going with Moose Eline carbon fiber skid plate and the moose radiator cages. The skid plate fit great no problems but it did make the bike sound different I guess deflecting the sound up. The rad cages were a pain in the butt. You had to drain and remove the radiators from the bike and then install. But then I had cut away alot of plastic on the inside of the shrouds so they would fit. They also make the shrouds stick out a little bit but really I didn't notice it when riding. They do feel very strong though and should really help on side impacts since they wrap around the entire radiator.

Share this post


Link to post
Share on other sites

That's one concern I had about the cages that don't also have integrated front guards-interference with the plastic fins. The aluminum front guards offer good protection also. I do wonder if eliminating the plastic fins in favor of the aluminum front guards reduces the air flow directed over the radiators though.

I just ordered a Ricochet skid plate and I'll probably order the Unibiker Radiator guards soon as well.

Share this post


Link to post
Share on other sites
That's one concern I had about the cages that don't also have integrated front guards-interference with the plastic fins. The aluminum front guards offer good protection also. I do wonder if eliminating the plastic fins in favor of the aluminum front guards reduces the air flow directed over the radiators though.

I just ordered a Ricochet skid plate and I'll probably order the Unibiker Radiator guards soon as well.

I personally think they plastic louvers help draw air into the radiators and as hot as these bikes run at slow speeds I didn't want to restrict the airflow. I personally don't care for the unibikers, my friend bought them for his 2004 wr450f and had to cut out half the back supports on the right radiator so they would fit. Another friend had them on a 2005 cr450x and they stuck out so far that the first time he dropped it they dug into the ground twisted the crap out of the guard and the radiator. I would hope they have solved these problems by now but I wasn't impressed with them. I have a few friends that run the moose cages and none of them have had any issues so I went the route. I just didn't like cut out the inside of the shrouds.

Share this post


Link to post
Share on other sites
I do wonder if eliminating the plastic fins in favor of the aluminum front guards reduces the air flow directed over the radiators though.

It does. But whether it's enough to cause a problem is another matter.

Share this post


Link to post
Share on other sites
It does. But whether it's enough to cause a problem is another matter.

I did some brush busting yesterday and my friends wr450 with the unibikers started over heating but my bike didn't even gurgle. So did my friends ktm300 with a fan on it but then again that bike overheats on every hill climb, hence the need for the fan. Coincidence? Probably.........:smirk:

Share this post


Link to post
Share on other sites

Whew, I read the thread title and came in just in case you purchased the same bash plate I purchased (and have since taken off). Thankfully you didn't. I won't name names but mine was so annoying & loud that it drew attention each time the throttle was turned. Sounded like a bolt was missing or a crack developed. I was the guy looking down and up each pre-ride.

Share this post


Link to post
Share on other sites
Whew, I read the thread title and came in just in case you purchased the same bash plate I purchased (and have since taken off). Thankfully you didn't. I won't name names but mine was so annoying & loud that it drew attention each time the throttle was turned. Sounded like a bolt was missing or a crack developed. I was the guy looking down and up each pre-ride.

Maybe a little foam weatherstripping at the contact points would take care of the skidplate noise?

Share this post


Link to post
Share on other sites
Whew, I read the thread title and came in just in case you purchased the same bash plate I purchased (and have since taken off). Thankfully you didn't. I won't name names but mine was so annoying & loud that it drew attention each time the throttle was turned. Sounded like a bolt was missing or a crack developed. I was the guy looking down and up each pre-ride.

Give me a hint, was it carbon fiber??? I really noticed the noise right away, it sounds very different with this skid plate. Not even sure how to describe the sound my bike makes now with the skid plate, kind of a loud wind blowing or something.:smirk:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

  • Similar Content

    • By BDTRENT
      Selling an FMF Power Core 4 exhaust system off my 450FX. Exhaust has 80 hours and is 100% functional. This will also fit the 14-15 YZ450F and 16-18 Wr450F. If needed I can also include new muffler packing although it does not need it. 
    • By Woody Oakson
      I have a 2008 YZ450F with a stock header pipe and Pro Circuit T-4 Slip-On Exhaust. I'm 99% sure the slip on is shot because its loud as hell and when I take it off and shake it it rattles. I would repack it but the screws are all stripped ect.
      Anyways I've gone over the carb multiple times and I've got it running pretty well. The only issue I have with the bike is that it sputters and pops around 1/2 throttle when I hold it there. When I give it full throttle from any RPM it runs great or when I give it about 3/4 throttle it spins up like a top to redline.
      Initially the popping and sputtering was way worse I made the situation better by moving the pilot jet up in a few sizes from a 45 (stock) to a 62. The issue has gotten way better since then but I'm not super sure what to do from here. Should I keep moving my pilot jet up in size because that's a pretty large jump right? I tried changing my needle clip position but that didn't help much if anything it just made starting it worse and little to no impact on the ride.
      Any input on this would be helpful. I don't want to buy other slip on. Also as for the rest of the carb I'm very sure everything else in it is what it needs to be at. I've replaced all the gaskets and O-rings cleaned all the jets, valve holes ect. fixed the accelerator pump timing. I just thinks its strange that my pilot jet size is going so far from the stock 45, but all symptoms point to the bike running lean.
    • By Haydenbaha
      Hi I was wondering if y’all have been using a 450 on your YZ250F?
    • By RockerYZWR
      Excel Takasago 17x3 front and 17x5 rear supermoto wheels with Metzler M3 tires in very lightly used condition. Less than 200 miles total on the setup. Warp 9 spokes. Rear has a Talon hub with 45T Sunstar steel sprocket and OEM rear disc, and front has a polished OEM Yamaha WR450F hub (for the stock speedometer), with a Motomaster 320mm disc. Included is a DID gold o-ring chain, 14T front sprocket, and front brake caliper adapter for a truly turn key setup. Everything is in excellent condition, not a single scratch on these wheels. Came off my '11 WR450F, but will fit many different Yamahas with 20mm front and 22mm rear axles. Asking $1400 plus shipping.
      **Will be driving up near Atlanta, then to northern Louisiana, OKC, and down through Dallas and Houston, TX soon -- can meet or deliver if in the area (Aug 31-Sep 9)**
    • By YZ426fNC
      Hi I’m new on the forum and I was wondering if a 2001 Yamaha YZ426f clutch is interchangeable with a 2002 Yamaha YZ426f clutch thanks , Coleman
×