Jump to content
Sign in to follow this  

Need torque specs 86 cr80

Recommended Posts

Can anyone hook me up with any info I need for doing a rering/topend on my 86 cr80? Ring gap, spark gap, head torque? I don't have a manual and my compression is crap

Share this post


Link to post
Share on other sites

dnt supose any one knows if the flywheel sensor from a 1983 model will fit other years if so what year upto?

Share this post


Link to post
Share on other sites
Can anyone hook me up with any info I need for doing a rering/topend on my 86 cr80? Ring gap, spark gap, head torque? I don't have a manual and my compression is crap

Ring end gap is .008-.016

Head and base nut torque is 18-21 ft lbs

Spark plug gap is: .020 - .024

  • Like 1

Share this post


Link to post
Share on other sites
Ring end gap is .008-.016

Head and base nut torque is 18-21 ft lbs

Spark plug gap is: .020 - .024

Many thanks

Share this post


Link to post
Share on other sites

This seems like it could be an issue. Left plug came out of the bike. Right plug I ordered. Old plug gapped at .029. I put the new one in and and no piston interference, so I'm going to assume the store was right.

PhotoMay0994742PM_stzhtplgwj7772uka505.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

  • Similar Content

    • By D.Barrett
      Kicking around the idea of selling my CR250. I have other bikes and never get a chance to ride this one.

      This is a well-maintained bike with tons of aftermarket parts. It's set up primarily for woods/single-track riding, but will still do just fine on an MX track.

      Engine:
      -Fresh Pro-X top end(<1 hour)
      -FMF Gnarly pipe & FMF Shorty silencer(<1 hour on fresh packing)
      -PWK Air-Striker Carburetor(bought new from JD Jetting last year)
      -Steahy 10oz. Flywheel Weight
      -Boyesen Rad Valve with Carbon-fiber reeds
      -TwinAir air filter

      Misc:
      -Excel Pro-Series Wheels(19"/21")
      -Brand-new Shinko tires(546 Front, 505 Cheater Rear not mounted yet) w/ Heavy-duty tubes
      -Works Connection Radiator Guards
      -Skid Plate
      -FMF Factory 909 Handlebars
      -Polished Frame
      -Sunstar 13/51 Steel Sprockets(new in box)

      I'm sure I'm missing a few odds and ends. Comes with a Bill of Sale only. (708)287-1998 - Dave
    • By waldo
      Parting out 2000 cr 250r: frame 150.00, seat with brand new fx cover 30.00, sub frame 30.00, pro circuit works pipe 50.00, kick starter 10 bucks, tank with shrouds 30.00, rear shock 45.00, swing arm 40.00.  make offer on all other parts in picture. Buyer pays shipping from 36092 zip. 
    • By BabyGroot69
      Hello,
      I could not seem to find a similar thread so if one exists I apologize. I have an 02 cr250r with an 01 motor. I need to buy a new silencer with a spark arrestor because the current one does not have one. I am not sure if the owner before me used an 01 or 02 silencer because I have read the frame had significant changes from 01 to 02. Any thoughts? Thanks!
    • By Christo6060
      I want to restore a 1996 cr80 that doesn’t have any graphics and absolutely love the 1994 cr125r tank shroud graphics, I can’t seem to find anything that fits the cr80 with those graphics. I found one last week but lost the page and couldn’t track it down again, do the cr125r graphics fit the cr80 tank shrouds? or does anyone know where someone could make them for cheap or know about any in Australia 

    • By cerialsledder
      Hey guys,
       
      Could someone please explain the numbers on a needle jet for a mikuni carb?  I'm currently running a 38-73 needle but a lot of the people I talk to say I would be happier running a 38-70 needle.  I don't have a problem with going with what other recommend but I would like to understand the numbering for the needles first.  I understand the nozzle sizes, main jet and pilot jet it's just this damn needle thingamobob
       
      Thanks a lot 
×