Jump to content
Sign in to follow this  

Drz 400 JD jet kit. Please confirm my setup for 750ft elevation

Recommended Posts

So I'm in Charlotte NC at 750ft. Will be running full exhaust and 3x3

Now I've been doing some research and this is what I came up with.

Main Jet: 160

Blue Needle: 4th position

I also have Kintech Fuel screw 2.5 to 2.75 turns out.

Is this correct?

Thanks for any help

Share this post


Link to post
Share on other sites

Awesome thanks for the link.

I see your also in NC. What set up are you running?

Share this post


Link to post
Share on other sites

Use the factory 22.5 pilot with the Keintech fuel screw and the 160 main with open exhaust or the 155 main with an insert.

Share this post


Link to post
Share on other sites
Awesome thanks for the link.

I see your also in NC. What set up are you running?

I am number 14 on the "mikuni" page. stock exhaust opened up, 3"x3" mod, jd kit, 155 main, 25 pilot, blue needle 3rd clip and just recently adjusted my kientech mixture screw to about 2.25 turns for the warmer weather.:thumbsup:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×