2009 WR300 suspension settings

[mantrap]

Does anyone know the stock suspension setting for a 2009 WR300 with the 50mm Marzocchi forks.

[Pincushion]

The shim stacks or just the stock rebound and compression settings?

[mantrap]

The stock rebound and compression settings.

[Thane]

The stock stuff sucks! Just spend the money and get factory connection springs! It is a night and day difference.

[Dave A]

I have them written down and will post them as soon as i can get to it. Just got back to the States.

Dave

[frankrock363]

Thane how much do you weigh and what rate springs did you end up with?

[Pincushion]

Forgot about this thread.....

I'm 200# and ended up with 5.6 and .48 for the fork springs.

2009 WR300 stock clicker settings:

Forks

Compression = 12 clicks out from closed

Rebound = 12 clicks out from closed

Shock

High speed = max open

low speed = 15 clicks out from closed

Rebound = 15 clicks out from closed

Sounds like the usual 'right in the middle approach'

I usually end up with full soft compression and about 2/3 out on the rebound for the woods. After having my stuff revalved and resprung I have it close to the same... soft compression and middle ground rebound. The 09' stuff is awesome after a competent tuner can fix it. Very good stuff IMO.

[Gotlabs]

How much does your High speed adjuster move? Does it only move that 1/4" amount?