Jump to content
Sign in to follow this  

KYB Kit Fork 2010-2011

Recommended Posts

Does anyone has the stock stacks KYB B- Kit fork for a Suzuki RMZ-450 2010?

After few revalves my friend like the stock kit fork more,

but he has not notice the stock stacks.

any help welcome:worthy:

Share this post


Link to post
Share on other sites

be impressed if anyone has those stacks for you?just stick some 2010 yzf 405 stacks in?

Share this post


Link to post
Share on other sites

Thanks,

i think i need a call to Technicaltouch.

the current stack its way out for hard tracks.

no float , stiff base and single stage rebound valving.

its a Sandsetting for a very fast pro.

not the best for hard tracks:smirk:

Share this post


Link to post
Share on other sites

tell him to refit the STD fork , would be much better than the kit one

Share this post


Link to post
Share on other sites
tell him to refit the STD fork , would be much better than the kit one

Remove bling?

blasphemy

Share this post


Link to post
Share on other sites

Only way you can figured out the stock set up is call to technical touch. They have stamped their suspensions and listed the set up because every kit suspension is made for individual purposes. Pick up the number which is stamped to axel lug or top cap.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

  • Similar Content

    • By smokey9lives
      Hi,
      I have a 2003 DRZ (actually a KLX400) and the head tube bearings are shot.  I ordered a new set to install but I'm wondering if anyone has any recommendations on other parts I should replace while I have the front disassembled.  I was thinking about new rubber fork protectors, but are there other things that wear out on the DRZ front ends that you can only get to when disassambled?
      I also broke off a replacement key that I got for the steering lock.  I must have been made of cheap pot-metal.  Should I just remove the whole lock mechanism?
      Any tips or tricks for getting the old bearings out and the new ones in would be welcome!
      Thanks!
    • By hondahondo
      A few picks of my winter project.













    • By Luke Hufford
      Hey guys. I recently purchased a 16 yz250x and the first 2 rides i LOVED the suspension. Then the day before a race i reset all my clickers to stock and everything felt like crap. No plushness at all and deflected off everything. I now have a 5.4 shock spring for my 190 pound weight and dialed in sag. Any recommendations on where i should go from here? Right now the fork is 12 out on comp and 15 out on rebound. Shock is 1.75 turns out on hsc, 14 out on lsc, and 18 out on rebound. Any help would be appreciated!
    • By jake gu
      Today we’re going to be talking a little bit about automotive suspensions and how they work to smoothen the ride of your car. There are mainly three purposes of the automotive suspension system. First, they support the  weight of the vehicle. Second, they maintain accurate tire contact with the ground. And third, they absorb any shock that you get through the road when you hit a bump.
      Most modern vehicles come with an independent front suspension. Which means if one wheel hits a bump it does not disturb the other wheel. Nowadays, people use Coil Spring to support the majority of weight in the car. As it has a really good characteristics for absorbing any bumps as you go up and down on the road.
      However Springs aren’t very good at dissipating that energy. In fact that’s why you have the shock absorber. Which is there to smoothen out the ride and make sure the tire maintains contact with the road.
      In modern passenger vehicles the two most popular suspensions are McPherson strut and double wishbone style of suspension. The main advantage of the McPherson strut suspension is that it’s really cheap and simple that’s why a lot of manufacturers are moving towards this design. The double wishbone design allows the wheel to stay perpendicular to the body as it navigates a corner or as it goes over a bump. And that maintains good tire contact patch no matter where the wheel is situated. Another advantage of this design is that it can be made adjustable where you can control the position of upper control arms ball Joints.
      Click to Know More About Ball Joints and other Suspension Components
×