Jump to content
Sign in to follow this  

Check this stack out

Recommended Posts

Hey everyone,

I picked up a used 06 crf 250f that has already been revalved, and fc bottom collars added.

It had stock springs, so I'm assuming it was set up for a lighter than myself rider.

I plan to up the springs to .46 since I'm close to 200lbs, vet intermediate.

here's the stack arrangements....do you think I'm even in the ball park for my weight?

Really appreciate any input.

BV

PISTON

30X10 (8)

21

30

29

28

27

26

24

22

20

18 (3)

MV....1.40MM FLOAT

PISTON

20X10 (3)

18

17

13

11

17X15

REBOUND

PISTON

20X10 (3)

13

20

18

16

15

14

13

12

11X20

Share this post


Link to post
Share on other sites

thats a enduro setting.It needs much less float like 0.15mm to work well and even then it would be a little soft.

Share this post


Link to post
Share on other sites

Base

16 x 30.10

25.10

29.10

28.10

27.10

26.10

25.10

24.10

23.10

22.10

21.10

20.10

19.10

18.10

Mid

6 x 20.10

4 x 17.10

Share this post


Link to post
Share on other sites

I would give it a try with...

Base

12 x 30.10

29.10

28.10

27.10

26.10

25.10

24.10

23.10

22.10

21.10

20.10

19.10

18.10

(maby put the 25.10 and 4 x 30.10s to get the same hight)

Mid comp

Remove 1 20.10 from stock (5 x 20.10)

Rebound stock

0.46 or 0.47 springs

Mr P

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×