Jump to content
Sign in to follow this  

Clutch Issue, please help

Recommended Posts

2007 KTM XCF-W clutch issue.

I mistakenly put Hydraulic Clutch mineral oil instead of DOT 4 break fluid. Rode once with no problems what so ever. Two weeks later I have no clutch control... Opened the oil basket and the rubber gasket was swollen up. Replaced the gasket, drained the oil, and replaced with DOT 4. However, cannot build any pressure so I have no clutch control... :smirk:

Please help. What do I need to do to fix this problem? Thank you.

Share this post


Link to post
Share on other sites

make sure you properly bleed the line than try pumping it several times, if that doesn't work than you might need a master cylinder rebuild.

Share this post


Link to post
Share on other sites

I did bleed it properly, but nothing... Master cylinder rebuild sounds expensive...

Share this post


Link to post
Share on other sites
I did bleed it properly, but nothing... Master cylinder rebuild sounds expensive...

No, I think it might be $30,its just a little plunger a spring and a cir-clip.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×