Jump to content
Sign in to follow this  

after restriction

Recommended Posts

Hi guys

just a quick couple of questions,

I have taken the restrictor off my 03 drz which was the washer type reducing the intake to 32mm with which the bike now runs noticibly quicker but cuts out on deacceleration when coming up to idle. Is this a carb/jet problem or is it possible to adjust the idle screw (short term fix?) plus if anyone could tell me the right set up for the carb and jet numbers i would be eternaly grateful. i'm 700ft above sea level with a standard exhaust,k and n filter and stock mikuni 36mm carb plus i,m planning the 3x3 aswell many thanks Ben:worthy:

Share this post


Link to post
Share on other sites

do a search for " jetting spreadsheet". search "jetting", read a few threads, and find what you need. its fairly simple. we cant help you with jets until we know what kit your getting.

Share this post


Link to post
Share on other sites
thats twice today right? keep up the good work dvirgil.

yup:bonk: as much help i received i beleive i should payforward,,but searching has become a lost art..

Share this post


Link to post
Share on other sites
yup:bonk: as much help i received i beleive i should payforward,,but searching has become a lost art..

i concur.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

  • Similar Content

    • By Bignerd0100100
      Hey all, 
      I'm looking at buying a 2004 Suzuki DRZ400EK or at least I think it's an EK according to Vin lookup websites, but it does not appear to have a kickstarter. I was told the bike was owned by a motorcycle dealer and that it has a current green sticker, and a California license plate but has not been registered for the streets since 2011. I want this as a dual sport but am not clear if the fact that it already has a plate means I am good to register it or if maybe they took away the ability to register it after it was plated, California loves to do that kind of stuff. Since the bike was owned by a dealer I would think they were up on the latest regulations in California, but who knows. Can anyone add any insight as to what I should look for on the bike itself like the carburetor, model numbers etc? Or do I just try my luck at the DMV?
    • By smokey9lives
      Hi,
      I have a 2003 DRZ (actually a KLX400) and the head tube bearings are shot.  I ordered a new set to install but I'm wondering if anyone has any recommendations on other parts I should replace while I have the front disassembled.  I was thinking about new rubber fork protectors, but are there other things that wear out on the DRZ front ends that you can only get to when disassambled?
      I also broke off a replacement key that I got for the steering lock.  I must have been made of cheap pot-metal.  Should I just remove the whole lock mechanism?
      Any tips or tricks for getting the old bearings out and the new ones in would be welcome!
      Thanks!
    • By antonyp
      Hey Guys,
      I recently bought a 2003 DRZ400S and thought it would be a good idea to check the valves clearance etc . I timed the engine on TDC with the magneto mark aligned as per the manual but I find the cam timing slightly odd. The arrows pointing upward are on the 1st and 15th pin as they should but with the magneto timing mark aligned they are not perfectly straight. Same goes for the arrows that should be parallel to the cylinder head casing. Is this normal or should they be absolutely perfect ?
       

×