Jump to content
Sign in to follow this  

sealant between exp.ch. and silencer

Recommended Posts

Im getting some leakage between the silencer and where the expansion chamber meet. Yeah i know theres a rubber boot but it still spurts out.

Not a ton but enough to be annoying when it comes to cleaning.

Is there some sort of sealant that can be used with the rubber boot to seal it up?

Thanks

Share this post


Link to post
Share on other sites
Im getting some leakage between the silencer and where the expansion chamber meet. Yeah i know theres a rubber boot but it still spurts out.

Not a ton but enough to be annoying when it comes to cleaning.

Is there some sort of sealant that can be used with the rubber boot to seal it up?

Thanks

Put two zip ties on the rubber boot.

Share this post


Link to post
Share on other sites

I goop a good ring of high temp silicone around both ends of the boot as it all gets slipped together. This seals it and lasts quite a while. That ziptie idea sounds pretty slick....why didn't I think of that? I'll try that next time on this spoogy cr125 around here.

Share this post


Link to post
Share on other sites
Put two zip ties on the rubber boot.

That or safety wire. they both work for me.

Share this post


Link to post
Share on other sites

I would jet it right so it does not spooge out and make a mess.

But if that does not work all of the above are good ideas.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×