Jump to content
Sign in to follow this  

ttr-125 carb instal

Recommended Posts

Ok just installed the mikuni carb on my sons bike. Awesome starts so easy. So happy. Just one thing if I pull on the throttle quick it bogs out. But if pulled slowly runs well. So I ajusted the eclip on the needle on setting nothining chaged. Any ideas?

Share this post


Link to post
Share on other sites
Ok just installed the mikuni carb on my sons bike. Awesome starts so easy. So happy. Just one thing if I pull on the throttle quick it bogs out. But if pulled slowly runs well. So I ajusted the eclip on the needle on setting nothining chaged. Any ideas?

If the clip did nothing, you may be a tad fat on the pilot jet, go down one and see what happens.

If I recall right, I ran into exactly this on the wife's bike too.

Share this post


Link to post
Share on other sites

that carb is essentially a 2 stroke carb with no accelerator pump. it will do that because a 4 stroke has more vacuum signal and would be considered normal. shouldn't really notice it while riding. I'm assuming it is doing this while siting at a standstill?

Share this post


Link to post
Share on other sites

Yes just sitting just while im running the test. Need to ride other tan down the street. And thanks for the info appreciate it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×