rebuild question

93' XR650L

I have the engine back together and want to make sure I have oil flowing correctly.

So far I have cranked engine only and did get oil flowing up the return line. I thought I should get oil flowing also form the oil line from RH crank case to cylinder head cover, I did not? Should I get oil flowing up this line to the cylinder head cover?

Scott

I found the thread on priming finally. I got oil flowing through line with just little extra cranking. I did read that I could have applied air press to head vent tube or to oil tank to get oil pump primed.

Thanks for the site, It helps a lot!!

I found the thread on priming finally. I got oil flowing through line with just little extra cranking. I did read that I could have applied air press to head vent tube or to oil tank to get oil pump primed.

Thanks for the site, It helps a lot!!

:smirk:.......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now