Jump to content
Sign in to follow this  

ktm 690 can swap now fi light

Recommended Posts

I've just put original can's back on my 690sm and now the fi light is on all the time. Should i be worried.

Thanks matt

Share this post


Link to post
Share on other sites

If its on all the time you MUST visit the nearest authorized KTM workshop to check your injection system.

If it is blinking, count the blinks and check your owners manual to see to what error descriprion code refers to.

Stange problem though.

I do this job, exhanging cans, 2 times per month and no probs at all.

Share this post


Link to post
Share on other sites

it was blinking 8 times which manual says is throttle sensor. I adjusted throttle cable play and seems to have cured it.

Share this post


Link to post
Share on other sites

well that was short lived. Fi started flashing again. 8 flashes for throttle sensor. Has anyone any ideas what i should do before i take it to dealers.

Share this post


Link to post
Share on other sites
well that was short lived. Fi started flashing again. 8 flashes for throttle sensor. Has anyone any ideas what i should do before i take it to dealers.

I'd do a search on ADVRider. Actually do a site search on google for ADVRider

such as:

site:www.advrider.com FI 8 flashes 690

And variations of that search. The direct search on the site doesn't allow 3 letter words.. it's probably throttle cable play - try to adjust again?

Share this post


Link to post
Share on other sites

turns out it was the throttle position sensor, adjusted it and it's fine now

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×