Jump to content

how much oil in crf150r


Recommended Posts

The CRF150r/rb 2007 owners manual I have in front of me reads...

Recommended Engine Oil:

10w-30 or 10w-40

Oil Capacity:

0.56 liter (0.59 US qt, 0.49 Imp qt) at draining

0.59 liter (0.62 US qt, 0.52 Imp qt) at oil filter change <----Pretty sure this one is what you want.

Transmission Oil:

Oil Capacity:

0.57 liter (0.61 US qt, 0.51 Imp qt) at draining

0.65 liter (0.69 US qt, 0.57 Imp qt) at disassembly

Hope this helped.

0honda.....Get that oil change done and get out and ride!!!:ride:

Link to comment
Share on other sites

The CRF150r/rb 2007 owners manual I have in front of me reads...

Recommended Engine Oil:

10w-30 or 10w-40

Oil Capacity:

0.56 liter (0.59 US qt, 0.49 Imp qt) at draining

0.59 liter (0.62 US qt, 0.52 Imp qt) at oil filter change <----Pretty sure this one is what you want.

Transmission Oil:

Oil Capacity:

0.57 liter (0.61 US qt, 0.51 Imp qt) at draining

0.65 liter (0.69 US qt, 0.57 Imp qt) at disassembly

Hope this helped.

0honda.....Get that oil change done and get out and ride!!!:ride:

Just to make sure in case you don't have anything that measures quarts.... .62 US quarts is equal to 2.48 Cups, 19.84 ounces and 1.24 Pints.

Here is the converter I used..... http://www.escapeartist.com/Conversions/Gallons_Liters/

Hope this speeds it up so you can ride sooner!

Link to comment
Share on other sites

  • 8 years later...
  • 3 years later...
3 hours ago, Kaden Guenther said:

just emptied all the oil out of my clutch side crf150r how much oil do I put into it if there’s none in it? Please help just redid my clutches

Specs were listed in an earlier post,

Transmission Oil:

Oil Capacity:

0.57 liter (0.61 US qt, 0.51 Imp qt) at draining

0.65 liter (0.69 US qt, 0.57 Imp qt) at disassembly

Link to comment
Share on other sites

3 hours ago, Kaden Guenther said:

image.thumb.jpg.5b55d6f5bb02e8274697a981a6142e24.jpg

 

Just an observation but there's a pressure plate/clutch spring bolt that doesn't match the three others,

make sure it goes in the proper location if the pressure plate has been re-tapped to a different thread pitch.

 

  • Like 1
Link to comment
Share on other sites

17 hours ago, mlatour said:

 

Just an observation but there's a pressure plate/clutch spring bolt that doesn't match the three others,

make sure it goes in the proper location if the pressure plate has been re-tapped to a different thread pitch.

 

Wow good catch. Seriously. It appears to be metric, but it and the washer are different.

And HRCNICK11,

.57Litres = 570 ml which is 570cc. Your RatioRite has those increments so you don't need to do any deciphering

 

 

Link to comment
Share on other sites

On 6/20/2023 at 3:23 PM, mlatour said:

 

Just an observation but there's a pressure plate/clutch spring bolt that doesn't match the three others,

make sure it goes in the proper location if the pressure plate has been re-tapped to a different thread pitch.

 

I snapped the other bolt so I had to go get one from ace.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...