Jump to content

No Fire..08 ktm 300 xc-w


Recommended Posts

my little 300 stall up in the trail past weekend. No more fire on the plug

i change, the coil with the one on my friend bike, again no fire

i check the current on the yellow/red wire on the starter relay, current is ok

i change the cdi, nothing happen

How can i check if the stator work ?

what can i check to find my trouble

thanks alot

Link to comment
Share on other sites

Make sure the plug cap is screwed onto the plug wire correctly. Sometimes you have to trim the plug wire 1/4" & screw it back on to get a good connection. Try holding the bare wire 1/8" off the motor w/insulated pliers to see if it's getting spark before trimming.

Link to comment
Share on other sites

Hi

I checked out all the thing, cdi box, ignition, rectifier, wire and nothing

i'm waiting about a multimeter to test the stator

it is normal that the white/blue wire on the ignition coil is a ground. because the bar that pass thru the coil is a ground too, so i pretty sceptical about that wire.

do you have some info about cheking the stator, because the bike does not start, the only thing i can do is kick it

thanks alot !!

Link to comment
Share on other sites

When i was quitting my garage with it, the motor made a hezitation, it was like he stalling, i twist the throttle off and on and suddently the motor goes good. 30 minute later i depress the throttle to wait my friend, and the bike stalled on idle or low rpm. I'm waiting about a multimeter to continu my test but all your comment or experience is appreciate

thanks you

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...