I picked up my new 2011 YZ450 today at the shop:banana: and was wanting to change out some things on it. First off I all ready have a 2010 YZ450 That has a full 4.1 FMF exhaust and I have a Flexx handle bar on it. I'm going to take them off and put them on the 2011. I'm wondering if I should take the forks and shock off the 2010 and put them on the 2011. The reason for this is......My 2010 had the DDT kit in the forks and the shock was re-sprung and re shimmed to the softer side. I went from the stock 5.6kg spring to the 5.4kg on the shock cause the stock spring was to stiff for me. I couldn't get the bike to turn that good. Since I had it re-sprung it turns better for me now(squats in the turns better). My 2010 had the DDT kit put in it at 11.4 hours. I had the forks serviced when it had 41.0 hrs and that's when the shock was re-sprung and shimmed. Now it has 55.2 hours on it and I was just wondering if I should swap the forks/shock out to the 2011? Seemed like I gave around $700.00 for the kit and to have it installed. I just didn't want to have to buy another kit if I could just use the forks/shock on my 2010. Didn't know if the used forks/shock on the 2010 would complement the 2011 since it was a new ride. I guess the forks/shock on any bike would be considered new if one kept them serviced and kept them up. My 2010 forks just have scratch marks on them at the bottom where the pinch bolts are at and the upper tubes have little pits in them where dirt or rocks hit it but nothing major like dents or anything. I was just wondering what to do or the best way to do it.