Jump to content
Sign in to follow this  

2012 SX250 info

Recommended Posts

For everyones info here the euro stacks for the 2012 sx250 2T

i have in a 2012 sx125 and a 250f so will post these at a later date

FORKS

4.6N 43 OD/485MM SPRINGS

19PSI N02 PRESSURE

28MM BASE PISTON

22.75 MID PISTON TRI-PORT

12MM DAMPER ROD

FLOAT 0.5MM

350CC OIL VOL

SKF OIL AND DUST SEALS!

BASE

24X0.10 X12

23X0.10 X2

22X0.10 X2

21X0.10 X2

20X0.10 X2

19X0.10

18X0.10

17X0.10

16X0.10

15X0.10

14X0.10

13X0.10

12X0.10

10X0.30

MID

20X0.10

20X0.10

20X0.10

18X0.10

18X0.10

16X0.10

14X0.10

10X0.30

18X0.45

8X6X0.30 POST SPACER

REB

20DX0.10

20DX0.10

20DX0.10

12X0.10

16X0.10

14X0.10

13X0.10

12X0.10

10X0.30

SHOCK

54N 63/63/260 SPRING

50MM PISTON TRI-PORT

18MM SHAFT

16MM ID SHIMS

COMP

44X0.20

44X0.20

44X0.20

44X0.20

44X0.20

44X0.20

28X0.10

44X0.20

44X0.20

44X0.20

44X0.20

42X0.20

42X0.20

42X0.20

40X0.25

38X0.25

36X0.25

34X0.25

32X0.25

30X0.25

28X0.25

26X0.25

24X0.25

21X0.25

REB

40X0.20

40X0.20

40X0.20

28X0.10

40X0.25

38X0.25

34X0.25

32X0.25

30X0.25

28X0.25

21X0.30

:smashpc:

MARK.

Share this post


Link to post
Share on other sites

Thanks Mark!

What fork stop plate, base and reb?

Base looks like terrible 08 SXS.

Share this post


Link to post
Share on other sites

Mark have u been out testing with this bike what do u think of the shock rebound is there enough high speed rebound and it's a 18mm shaft.

Share this post


Link to post
Share on other sites

hey mark just a question mate, im 160 pounds without gear race MX and going to have a 2012 ktm 250sxf EU what spring rates do you recomend stock are 44/5.4, will i get the right rear shock sag with a 5.4 and are you still having troubles with CC foks diving and being a little soft on top?

Share this post


Link to post
Share on other sites
hey mark just a question mate, im 160 pounds without gear race MX and going to have a 2012 ktm 250sxf EU what spring rates do you recomend stock are 44/5.4, will i get the right rear shock sag with a 5.4 and are you still having troubles with CC foks diving and being a little soft on top?

id prob run a 52.5N rear and 4.4N front.

the forks dive due to the 0.5mm float - imo this HAS to closed up. with changes to the mid and the reduced float the fork works very well.

Share this post


Link to post
Share on other sites
Mark have u been out testing with this bike what do u think of the shock rebound is there enough high speed rebound and it's a 18mm shaft.

i added a little low speed, the high speed there is a little lacking, but its the formation of the stack - i found good results going to 0.2's under the 34 and adding a 26,24 &22 all 0.20.

:smashpc:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...