Rear hydraulic brake problem

[Bonefrost]

I changed my tire and when I went to put it back on my brake shoes were way too close to slide over the disc.

I took the caliper off and pushed on my brake pedal,then they totally locked together.

I then took the bolt/screws off to get the pads off,drained the hydrolic fuild and theyre still locked.

Any ideas?

Is it a suction thing,as in if I properly bleed the brakes it will release?

This is a china pitbike,but I thought this is a broad enough question to go in this forum.And I have a ride in a couple days w/ no way to get to a shop.

[moose_338]

lol all you need to do is stick a screw driver in between your pads and push the piston back in......next time don't play with the brake pedal when the wheels off

[450XJimDirt]

Sounds like the piston is cocked sideways , you are going to have to try to get it straight before it will go back in

[Bonefrost]

theres no way that piston is moving,I tired the screwdriver thing already.thanks tho.

I'll see if its cocked.

thanks.