Jump to content
Sign in to follow this  

Drz intake boot

Recommended Posts

Hi i was wondering if anyone know the dimentions of the head to carb intake boot (mm) i want to change the intake manifold becouse its worn a bit so i can order the correct bore hose ! also will a sillicon hose like those they use on intercoolers ( like this one http://image.made-in-china.com/2f0j00tMCQeSKaYHqR/Coupling-Silicone-Hose.jpg ) will do the work or the intake uses a special part ?

i have an 1st gen 41mm fcr

This part here

30260010482737962257910.jpg

also becouse my air filter hits the frame will be any problem if i use a 45 degree elbow hose to mount the air filter ? turbulence etc ?

like this one http://www.ebay.co.uk/itm/150616703765?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

thanks

Share this post


Link to post
Share on other sites

I just measured a brand new boot i just got in the mail. looks to be about 48mm ID on both ends.

Hope this helps

-Dan

Share this post


Link to post
Share on other sites

Dan thanks i just fixed my boot with a silicon collar like this

scaled.php?server=26&filename=1004429k.jpg&res=medium

yes this is a 41mm fcr feeding a CCM 404 drz E motor on stock CC

as for the jetting i really dont remember :smashpc:

i do remember the pilot/slow air jet is 100 the main air jet is 200

i thing the main jet is 160

but i really dont remember 👍

Share this post


Link to post
Share on other sites

i know 👍 i have to make some jetting when i find some free time

but i dont have any idea about jetting fcr's so i dont have any idea from what jetting should i start :smashpc:

i would appreciate any suggestions on what jetting to use

its the drz-E engine ( cams, head, compression, ) and a pro circuit T4 exhaust

the filter needs cleaning :busted: im waiting a K&N recharger kit to clean it

Share this post


Link to post
Share on other sites

It's going to be hard to set that up without a gas analyser/dyno...

The carb is too big for stock cc ...That pod filter system won't make jetting easier....

How does it run?

Share this post


Link to post
Share on other sites

well the funny thing is the the bike runs pretty nice as is now :S

and it doesn't bog and keeps pull until the redline

i might go on a dyno to see whats going on with this jetting

Share this post


Link to post
Share on other sites

175 main jet

48 pilot

65 choke

200 main air jet

100 pilot air jet

this is my jetting :smashpc:

and here is the pod after cleaning

1004434g.jpg

Edited by Vatos_locos

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...