Jump to content
Sign in to follow this  

'06 YZ125 rear brake issue

Recommended Posts

Last week my rear brakes went out while on the trail. I investigated and found no leaks and the fluid level was good.

I bled the brakes and still could not get any pressure to build. My guess was that the bike just needed a MC rebuild, so, after installing the new MC kit and bleeding the brakes, still no pressure. (All though I get fluid through the caliper and out the bleed screw with no air.):smashpc:

What is wrong with my brakes? Could it be the MC?

Please help as the weather is perfect here and I wanna ride.👍

Thanks

Share this post


Link to post
Share on other sites

At first I did have one of the seals in wrong but, I looked at my manual and made the correction.

What do you mean a blister? I'll look into this.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...