Jump to content
Sign in to follow this  

loc tite fixes

Recommended Posts

i want to do these as listed in the faqs section but i do not have an impact wrench. is there any way to do them with out one and also were can you pic up the new fasteners for the flywheel

Share this post


Link to post
Share on other sites
i want to do these as listed in the faqs section but i do not have an impact wrench. is there any way to do them with out one

With a buddy, to sit on the seat, hold the bike against a wall, and mash the rear brake.. and another to use a 1/2 drive braker bar and well fitting socket.. YES you can bust loose all of the fasteners needed, as well as TQ them back down.

and also were can you pic up the new fasteners for the flywheel

Any decent hardware store or automotive parts shop.

only needed depending on year of bike and what fasteners are in there now.

Call around, your looking for 6 each M6 x 16 x 1.0 in Grade 10.9 or 12.9.fasteners.

or order online

http://www.mcmaster.com/#

Spend an hour in that catalog... you'll find pleanty of things to add to the order so your not just buying 6 socket head cap screws..👍

Or depending on where your at in Untah Go to a local Fastenal

http://www.fastenal.com/web/locations.ex

or Grainger

http://www.grainger.com/Grainger/wwg/branchSearchRender.shtml

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...