Jump to content
Sign in to follow this  

Need help to id front caliper mount

Recommended Posts

I have a 2001 cr250 that may have come with non standard forks. I tried to buy a front caliper that was said to be off a 2000 cr250 and the mounting holes were different on the fork mounting bracket. I measured my fork mounting bracket bolt centers and it is exactly 4 inches cntr to cntr. This is the measurment on the fork (for the bolt holes) that the parts list says is a BRACKET SUB-ASSY (same part from 2000 to 2003 on the parts list).

Can someone please measure theirs if they know for sure that they have stock forks, and reply with the measurement?

PS: I need the mounting bracket along with the caliper as the whole thing on mine is damaged. At this point I am afraid to order anything as I may have shawa forks off another model.

Thanks, in advance

Share this post


Link to post
Share on other sites

Great, thanks. So mine is stock at 102mm. The one that I was about to buy must of been off an 04 & up and the seller was misinformed about its origin.

Off I go to Eeebay

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×