Kx250 2t Silencer Test/review

[sc_enduro_racer]

bike-2005 kx250

silencers tested- PC 304 andFMF turbinecore 2 s/a

Hope yall enjoy !

[Mr. Neutron]

On my KTM I used to own, I bought some of the factory rubber grommets to put in the large holes of the FMF Turbinecore mounts. I'm thinkin' this might be something you wanna look into if you choose to run that FMF..... Otherwise, that silencer is gonna be able to move around a bit, eventually.

Jimmie

[sc_enduro_racer]

On my KTM I used to own, I bought some of the factory rubber grommets to put in the large holes of the FMF Turbinecore mounts. I'm thinkin' this might be something you wanna look into if you choose to run that FMF..... Otherwise, that silencer is gonna be able to move around a bit, eventually.

Jimmie

Yea, I got mine setup like yours, works great

[jlmotox]

need to get the correct hardware! should be rubber mounted with gromets, that is why the hole is so big on the silencer and why there is a gap...and that video was painful to watch dude...sorry!

[DBMX 925]

^ O my gosh yes, I didn't want to be the first to say it, I'll pile it on now.

[hardhitwarrior]

you can try making a "shim" out of car radiator hose and put those at each side of the tabs on the silencer mounts. put also washers on both sides.

[sc_enduro_racer]

need to get the correct hardware! should be rubber mounted with gromets, that is why the hole is so big on the silencer and why there is a gap...and that video was painful to watch dude...sorry!

If you mean painful as in quality, I agree, I had to use my crappy camera

[TimTee]

For what silencers cost they should come with grommets, but since they don't, you are supposed to remove the grommets from your old silencer and transfer them over. Or buy new ones.

No need to rig something up.

[KDXGarage]

Thanks for the video comparison.

Yeah, just pull the OEM rubber grommets and stock collars / washers. I changed mine from OEM to a Pro Circuit. I had to move the OEM parts over. Mine was purchased used, but I doubt they came with the rubber grommets.

FMF markets their silencers as 2003 - 2007. PC markets theirs as 2005 - 2007.

[zig06]

All I'm going to say is that you can not compare a spark arrestor silencer against an open silencer, it's just not a fair fight. They are two totally different designs ment for two totally different applications.