Jump to content
Sign in to follow this  

jetting question

Recommended Posts

hey yall, just got a 2011 drz-s and i'm x-eyed now from all the info here, but my question is this...all stock if i do the 3x3 mod i should jet it 155 main, jd needle (blue) on the 4th clip, 25 pilot w/stk fuel screw, 2.5-2.75 turns out correct? and the jd jet kit is #jds005 correct? im in vegas and elevation is approx. 2000 ft.

Share this post


Link to post
Share on other sites

You have researched well.....:busted:

#jds005 is the correct kit....http://shop.thumpertalk.com/product_p/int_jdjetting_jetkit.htm

for stock pipe , 3x3 mod ...

155 main jet

jd blue needle

clip 4

22.5 pilot jet with extended screw or 25 pilot jet with stock screw

2.75 turns

If your regularly going above your current altitude try clip 3...

Share this post


Link to post
Share on other sites

id keep it in the 3rd clip and try that....removing the needle is easy enough to change postions with out removing the carb.....

Share this post


Link to post
Share on other sites

Your in Vegas, weres the bike pictures?

for stock pipe , 3x3 mod ...

155 main jet

jd blue needle

clip 3rd clip is the best!

22.5 pilot jet with extended screw, 2.75 turns out.

The bike run fat here, we don't have the good sea leave Cal air here. You can even go with a 152.5 it will run a littel better. I would sick with the 155 just in case you do go lower in altitude.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×