Jump to content
Sign in to follow this  

Washing out front end FIX !!!

Recommended Posts

Forget all the raise the forks up in the clamps and less sag on the 250x and just got to ebay and get you a good deal on 20mm triple clamps. You will not believe how good it will turn, better than most 2 strokes, very stable and makes it even fill liter. I have had many bikes even a 04 crf450 i put 20mm triple clamps on and they work great. I also have a cr250 with 20's on it. I got the whole setup top, bottom, steam bearing, bar clamps and cable guide for $250. I bought the protapers for a 08 crf250r. You will not be able to mount the head light and need a front number plate for a 08 crf250r. If you need the light then think about before you buy some triple clamps, i don't ride at night so i didn't need it.

Share this post


Link to post
Share on other sites

i went down hard, my bike washed out to. so any 20mm clamp set will work for our bike or what? rebuilding forks now bought new rim . top triple was loose but still. what does the 20mm clamps do differently then stock? thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×